1. If the owner wants to replace the motorcycle handlebar, it is very simple. He only needs to loosen and remove the screw on the handlebar, and then remove the heat insulation tube on the handlebar.
2. At this time, you can see the chuck on the handle. Remove the chuck directly, and the semicircular pad will be exposed. The semicircular pad also needs to be removed.
3. When disassembling the handle, you need to adjust the angle of the handle smaller to make it easier to take it out from the hole. However, when installing a new handle, you must remove the internal screw spindle on the handle, and then Reinstall the handle.
4. When installing a new handle, you only need to use the handle to put it in the original hole, put it in the appropriate position, tighten the screws directly, and then install all the parts according to the disassembly movements, then this The motorcycle handlebar was replaced.
